About.

IMMERSION COOLING SYSTEM.

Noise! Heat! Unstable equipment work! Are you fed up with this?

Contact us. There is a solution!
Professional and confidential!

We provide individual turn-key solutions with heating up water, your house, office, pool, greenhouses etc.
You'll get a high-quality cooling system and free heating.

We also offer the master list of accessories for the self-building of the system:

baths / tanks
pumps
tank connection
automation, sensors
heat exchangers
fan emulators
immersion liquid
firmware

The main problems of air-cooling are heating, contamination, noise, unstable equipment work in operation. Overheating may reduce the equipment lifespan and cause its failure. Dust contamination causes overheating, reduces the service life and requires time for its clearance and maintenance. Noise brings discomfort and unwished attention especially when many devices work simultaneously.

We offer the innovative high-quality solution of the problems listed above: our immersion cooling system! Your equipment is immersed into the tanks with constantly circulating dielectric liquid. Due to the high heating power rate of our liquid and well-designed tanks the heat pickup provides the most effective results. For example, in the process of Antminer S9 work, heat is generated and can be used for heating up water, a house / an office / rooms , pools , boilers of indirect heating etc.

BENEFITS OF OUR IMMERSION COOLING SYSTEM:

Absolute noise reduction.
The fans, that are the main sources of noise, are removed before immersion ***
Dust-free.
It increases the lifespan of your equipment and saves the trouble of regular cleaning.
Decrease of power consumption.
With the immerse cooling system your equipment will consume by far less power, up to 60W for a cell (480w for eight Antminers S9). Such a saving is possible due to the fans removing.
Increase of the equipment lifespan.
It increases the lifespan of your equipment for 4-5 years through the absense of contamination, overheating and corrosion.
All-season work.
It provides efficacious work both in summer and winter.
Useful heating.
You can effectively use heat generated by your equipment. (1kW of heat from one ASIC S9, 8kW from the system with eight ASICs). The generated heat may be used, for example, for heating up a house, a flat, a greenhouse, a pool etc.
Increase of income.
The overclocking with the automatic increment of your profit. It speeds up the pay-back. The recommended inrease of the ASICs' productivity is 10-15%(for other models it is 10-25%) retaining the safety rates.
Perfect liquid.
Our immersion liquid is non-combustible, nonevaporating, colourless, scentless, inert, non-toxic, doesn't react with metals, plastic, rubber and doesn't need replacement.
Durability.
The system lifespan is 7 years.
Space saving

At the moment it is the best solution of all the problems connected with mining equipment operation. We are the developers and manufacturers of the immersion cooling system for ASICs and GPU! The tanks are produced both on turnkey basis and individually!

The photos and video of our system can be seen on our website or on our Youtube channel:

https://www.youtube.com/channel/UCI3M2DwWkpI9MwgXzsn-PDg

Telegram channels:

@IMMERSION_COOLING - The discussion on our immersion cooling systems.

https://t.me/immersion_cooling

@ASIC_DIP - Ready working systems. https://t.me/ASIC_DIP

@ASIC_DIP_SALE - The selling of fans emulators, immersion liquid, immersion cooling systems.

Catalog

Catalog.

Our production.

Crypto Boiler

Firmware

Immersion Liquids

Containers & Immersion systems

Accessories for Immersion systems

Cooperation

Cooperation
with us.

TOGETHER WE ARE ONE.

We are oper for cooperation. We will be interesting to many, in particular:

Mining farms;
If your company has capacities on ASICs miners Antminer, we can offer you to install our software on beneficial terms. The firmware will increase the productivity and reduce the power consumption of your devices.
Mining hotels;
System managers of the mining farms;
Big suppliers of BITMAIN company equipment;
We can be interesting to each other. Please, contact us in any case.

The contact form is below.

Telegram private messages @ASIC_DIP_SALE

FAQ.

Вопрос 1:

Ответ:

If you haven't found the answers for your questions in our group.

@IMMERSION_COOLING Discussions on immersion cooling systems. Ask us. We will definitely answer…

Clients

Clients.

CUSTOMERS FEEDBACK.

The feedback from our clients.

"You've got a really cool firmware! Very cool! In comparison with other developers the main its advantage is power consumption reduction and clearly chosen rates Th/s/kW. I will surely write about it on coming home and write my feedback properly."
[30/09/18 21:53] [Forwarded from coint jeka - @ pajero_vagon4]
"Good evening. In the evening yesterday I downloaded the new firmware from asicdip. Installed different batches on several asics both in the immersion and in the air. As I've noticed, the work has significantly improved on the presets. We have two types of power supply: 2000W in the immersion and 1800W in the air. Consequently, two types of presets are installed: for 17 terahash and 16.5 terahash. Asics were reboosted a couple of times, it was clear that the chips were lined up in the green zone. As a result, everything settled down at 17.1 and 16.6 terahash. All chips are green. There was an error about the incompatibility with BTC Tools. The hashrate wasn't shown. The guys from ASICDip quickly responded. In the morning dowloaded the firmware upgrade, now everything works. One more pleasant thing is Kerner log monitoring. It upgrades itself, you shouldn't reload the page. Thumbs up!

Thanks for the work! Finally something working “from the box” 👍👍👍"
[30/09/18 21:53] [Forwarded from coint jeka - @ pajero_vagon4]
"Adding to the firmware work: 3 s3 and 2 of them stopped coming on almost at once, and the second after 12 hours of work. And it showed the screens of empty pages with reset data and network settings loss. Tell at once: I needn't delete the firmware. Having rested for about twenty minutes, they were trying to reboost and went out in a minute. Restart without resting didn't work. I set my phone to see what was wrong at a remove. Having tried several times, I managed to reduce forcedly the frequency and the voltage. And they started to work: the first and then the second. After that I set them at 15.5. Everything worked, so I increased to 16 after several hours.

All three asics have been working under normal conditions for 24 hours already. It's not clear what it was, let's call it the bug of the first run. The firmware is decent, I like it.."
[30/09/18 21:53] [Forwarded from coint jeka - @ pajero_vagon4]
Adding to the firmware work: 3 s9 and 2 of them stopped coming on almost at once, and the second after 12 hours of work. And it showed the screens of empty pages with reset data and network settings loss. Tell at once: I needn't delete the firmware. Having rested for about twenty minutes, they were trying to reboost and went out in a minute. Restart without resting didn't work. I set my phone to see what was wrong at a remove. Having tried several times, I managed to reduce forcedly the frequency and the voltage. And they started to work: the first and then the second. After that I set them at 15.5. Everything worked, so I increased to 16 after several hours. All three asics have been working under normal conditions for 24 hours already. It's not clear what it was, let's call it the bug of the first run. The firmware is decent, I like it..
Guys, that's surely cool, but the firmware is focused on the industrial mining. When you have hundreds (or thousands) of ASICs it's hard to loop the boards (moreover, not all the boards are suitable for all cases) because of the radiators) The most important is to achieve total energy efficiency, preferably up to 80 W/Th. At single miners I get 75.
I installed it 9 days ago and since then haven?t changed anything. It is the only firmware, in which I haven?t changed anything for such period of time. Other failed every day, and this was turned on and that?s all.
Good day!!! I want to say a big thank you to the Asic Dip team, especially to Tver. I had the problems with S9 ASICs, they had viruses, but the admin did his best to help me and as a result, I have the following: with this firmware the consumption with ASIC boost is 1500 W with the velocity of 16 Th!!! Thank you again!!!
By the way, if there are the beginners I will share my experience: the productivity of the firmwares from Vnish is about 50 Th for 8 blades now (3 ASICs, one blade of one of the ASICs was spoiled and removed). 50 Th is more than original 14.5х3=44.5 ТН. Guys.. on 8 ASICs from 9 I have +11% (even though Victor gets 1.8% of them on good purposes). Holy shit..I really recommend.. especially to those who can't sleep peacefully, if they don?t use all the equipment they have for 100-105%!
The firmware 3.8.1 is f*cking awesome! Everything works great, the coolers smoothly rotate under the temperature, there are no frightening rotating explosions when blowing off. Cool ??
I was pleased by the communication with vnish! ????Very kind and responsible person! (not like Snake Claimlor) ??. With needed patience during half an hour he told me about all the details of using his firmware! He made it clear that he was not going to stop.. ????He is planning to develop the product in future!???? God send strength, knowledge and good luck to this GOOD MAN!????????????
I want to leave a review: the man (nickname Tver) helped me to install the firmware, everything is super cool. He explained what to do and we did everything together! Thanks))))
Good day! As a user of alternative firmwares, I’ll say the following: install and forget is just impossible, it may happen only with the Chinese ASICs! But the advantage of this firmware is online support, sometimes it may surprise how these people can answer the same questions a hundred times a day. So install them on several ASICs, clear out, ask questions and go ahead, install it then on all other ASICs. I am satisfied with this firmware, IMHO!
@tverkom thanks for your help! The man was trying for several hours to help me to set the ASICs, delete the old firmware with the virus and install your new firmware.