Antminer S19A 1.2.0 rc4

Release 1.2.0 rc4

POPULAR MODES:
S19A 115 TH/s - 3850 watt (33 watt - TH/s)
S19A 125 TH/s - 4600 watt (37 watt - TH/s)
S19A 140 TH/s - 6100 watt (43 watt - TH/s)

STOCK BITMAIN FIRMWARE:
S19A 90 TH/s - 3100 watt (34 watt - TH/s)

  • Release: 1.2.0 rc4

    Downloaded: 159

    Date: 08.08.2023

    Size of the firmware: 9.9 Mb

    Size of SD image: 14.3 Mb


    Hash Sum of the firmware: 4b93a5ecd695c4c5a042e9090fe04803

    Hash Sum of SD image: 3902fe4ec095850c89e7e36b24f3b2ac


      Update download 1.2.0 rc4     Install SD download 1.2.0 rc4  

    What's new:

    Added:
    1. NEW AUTOTUNING - automatic tuning of all chips!
    2. Remote firmware installation on A113D (amlogic) control boards from micro USB;
    3. Remote installation of firmware on xilinx (Zylinx) and BB (BeagleBon) control boards without using SD cards directly to NAND;
    4. Support for miners Antminer S19J+;
    5. Support for miners Antminer S19L;
    6. Limit on the number of miner reboots in case of problems;
    7. Presets (set of automatic settings) for S19a Pro;

    Changed:
    1. Updated presets (set of automatic settings) for S19Pro Hydro, S19Pro+ Hydro;
    2. API speed optimization;

    Fixed:
    1. Working with Nicehash;
    2. Errors that led to the fall of the miner (error code: 11);
    3. An error that caused the miner to freeze;
    4. Improvements in the interface;

    Currently supported Antminers with control boards:
    A113D (amlogic) with micro USB;
    xilinx (Zylinx);
    BB (BeagleBon);
    Write directly to NAND memory without SD;

    Models:
    Antminer S19
    Antminer S19+
    Antminer S19 (88) xil-sd
    Antminer S19 (88) aml-nand
    Antminer S19 (126)

    Antminer S19 Pro
    Antminer S19 Pro A
    Antminer S19 Pro Hydro
    Antminer S19 Pro+ Hydro
    Antminer S19 Hydro

    Antminer S19A
    Antminer S19i
    Antminer S19L
    Antminer S19 XP xil-sd
    Antminer S19 XP aml-nand

    Antminer S19J
    Antminer S19J+
    Antminer S19J BB
    Antminer S19J Pro (xil-sd)
    Antminer S19J Pro (aml-nand)
    Antminer S19J Pro+
    Antminer S19J Pro+ BB
    Antminer S19J Pro A
    Antminer S19J Pro A BB
    Antminer S19J Pro BB

    Antminer T19

    Mass installation of firmware without SD cards, order via Telegram


  • Release: 1.1.12

    Downloaded: 80

    Date: 07.02.2023

    Size of the firmware: 0.0 Mb

    Size of SD image: 0.0 Mb


    Hash Sum of the firmware:

    Hash Sum of SD image:


      Update download 1.1.12     Install SD download 1.1.12  

    What's new:

    New:
    1. Support for miners S19 (88), S19j Pro A, S19 XP;
    2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
    3. MAC addresses viewable from the dashboard;
    4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
    5. Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
    6. Widgets are responsive now! 4k? 1080p? 480p? It all looks BEAUTIFUL;
    7. Voltage compensation based on the temperature and performance of the miner;
    8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
    9. EEPROM support for new miner models (Yes even those weird ones);
    10. Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON;
    11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);

    Changed:
    1. Work with network settings (DHCP → Static);
    2. Pool Widget;
    3. Board Widget;
    4. Fonts and their adaptability;
    5. Expanded optimized interface mode;
    6. Location of alerts;
    7. Display firmware version Location (Bottom right);

    Bugs fixed:
    1. Fixed an issue that could occur while changing operation of pools by API;
    2. Operation of Reset/IP Report Buttons for AML Control Boards;
    3. Incorrect baud rate setting for 136x chips;
    4. Inability to generate a diagnostic report;
    5. Operating mode of the device without hashboards connected to it;
    6. Firmware error on some BB models;
    7. Issues with graph ranges not always returning to true value fixed;

    Currently supported:
    Antminer S19
    Antminer S19+
    Antminer S19A
    Antminer S19A Pro
    Antminer S19I
    Antminer S19J
    Antminer S19J BB
    Antminer S19J Pro
    Antminer S19 Pro A
    Antminer S19J Pro A BB
    Antminer S19J Pro BB
    Antminer S19 Pro
    Antminer S19(88)
    Antminer T19

    Pre-order v1.1.12
    Antminer S19j Pro aml
    Antminer S19 Pro aml
    Antminer S19j Pro BB aml
    Antminer S19 XP aml

    Telegram Pre-order


  • Release: 1.1.11

    Downloaded: 144

    Date: 19.08.2022

    Size of the firmware: 0.0 Mb

    Size of SD image: 0.0 Mb


    Hash Sum of the firmware:

    Hash Sum of SD image:


      Update download 1.1.11     Install SD download 1.1.11  

    What's new:

    1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
    2) Panel "quick" settings have been added;
    3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
    4) Fixed interface operation when accessed via https://;
    5) Improved support for mobile devices (Scaling issues resolved as well);
    6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
    7) Antminer S19+ support;
    8) Antminer S19i support;
    9) Support for Antminer S19 (with 88 chips);
    10) Antminer S19 Pro A support;
    11) Antminer S19j Pro A support;
    12) Support for new models of power supplies;
    13) Support for various hash board modifications Bitmain made;
    14) Fixed bugs leading to a restart of the miner;
    15) Improved polling of temperature sensors and chips;
    16) Support for the pause / resume function has been extended to the entire series of firmware;
    17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A


  • Release: 1.1.9

    Downloaded: 167

    Date: 01.06.2022

    Size of the firmware: 0.0 Mb

    Size of SD image: 0.0 Mb


    Hash Sum of the firmware:

    Hash Sum of SD image:


      Update download 1.1.9     Install SD download 1.1.9  

    What's new:

    1) modiffied our API a bit.
    2) fixed chip layout in s19A and some small UI fixes.
    3) moved “modded psu” switch to “overclocking” page.
    4) restrict profile selection if your’re using stock PSU.
    5) fixed an issue when mining doesn’t return to user pools and hangs.
    6) added support of aftermarket PSU from HMTech.
    7) made “pause” and “resume” cgminer API commands available from local network.


Chronology of changes by release.

Gallery

Installation and configuration in pictures.


Video

You can get acquainted with the advantages of the firmware and the main functions by watching the video:


Do you want to cooperate with us?

We offer our partners beneficial cooperation

Asicdip offers special partnership terms for owners and administrators of large mining farms. For wholesalers, mining equipment and major repair services!

As a partner you will receive:

  • Personal assembly of the firmware with your logo and your commission
  • 24/7 technical support for integrating and configuring the firmware.
  • Priority of updates - new firmware versions, before official releases