Firmware

POPULAR MODES:
T19 85 TH/s - 2700 watt (31 watt -TH/s)
T19 105 TH/s - 3700 watt (35 watt - TH/s
T19 120 TH/s - 4500 watt (37 watt - TH/s)
T19 128 TH/s - 5100 watt (40 watt - TH/s)

STOCK BITMAIN FIRMWARE:
T19 81 TH/s - 3100 watt (38 watt - TH/s)

• Release: 1.2.0 rc4

  Downloaded: 715

  Date: 08.08.2023

  Size of the firmware: 9.9 Mb

  Size of SD image: 14.3 Mb

  
  

  Hash Sum of the firmware: ee0d7b2a7218875a5eb936c31a4a839b

  Hash Sum of SD image: 7b8f0bfb0f55cae7f0544c4f0d795d66

  
    Update download 1.2.0 rc4     Install SD download 1.2.0 rc4  

  What's new:

  Added:
  1. NEW AUTOTUNING - automatic tuning of all chips!
  2. Remote firmware installation on A113D (amlogic) control boards from micro USB;
  3. Remote installation of firmware on xilinx (Zylinx) and BB (BeagleBon) control boards without using SD cards directly to NAND;
  4. Support for miners Antminer S19J+;
  5. Support for miners Antminer S19L;
  6. Limit on the number of miner reboots in case of problems;
  7. Presets (set of automatic settings) for S19a Pro;
  
  Changed:
  1. Updated presets (set of automatic settings) for S19Pro Hydro, S19Pro+ Hydro;
  2. API speed optimization;
  
  Fixed:
  1. Working with Nicehash;
  2. Errors that led to the fall of the miner (error code: 11);
  3. An error that caused the miner to freeze;
  4. Improvements in the interface;
  
  Currently supported Antminers with control boards:
  A113D (amlogic) with micro USB;
  xilinx (Zylinx);
  BB (BeagleBon);
  Write directly to NAND memory without SD;
  
  Models:
  Antminer S19
  Antminer S19+
  Antminer S19 (88) xil-sd
  Antminer S19 (88) aml-nand
  Antminer S19 (126)
  
  Antminer S19 Pro
  Antminer S19 Pro A
  Antminer S19 Pro Hydro
  Antminer S19 Pro+ Hydro
  Antminer S19 Hydro
  
  Antminer S19A
  Antminer S19i
  Antminer S19L
  Antminer S19 XP xil-sd
  Antminer S19 XP aml-nand
  
  Antminer S19J
  Antminer S19J+
  Antminer S19J BB
  Antminer S19J Pro (xil-sd)
  Antminer S19J Pro (aml-nand)
  Antminer S19J Pro+
  Antminer S19J Pro+ BB
  Antminer S19J Pro A
  Antminer S19J Pro A BB
  Antminer S19J Pro BB
  
  Antminer T19
  
  Mass installation of firmware without SD cards, order via Telegram
  

  ---

• Release: 1.1.12

  Downloaded: 176

  Date: 07.02.2023

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.12     Install SD download 1.1.12  

  What's new:

  New:
  1. Support for miners S19 (88), S19j Pro A, S19 XP;
  2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
  3. MAC addresses viewable from the dashboard;
  4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
  5. Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
  6. Widgets are responsive now! 4k? 1080p? 480p? It all looks BEAUTIFUL;
  7. Voltage compensation based on the temperature and performance of the miner;
  8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
  9. EEPROM support for new miner models (Yes even those weird ones);
  10. Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON;
  11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
  
  Changed:
  1. Work with network settings (DHCP → Static);
  2. Pool Widget;
  3. Board Widget;
  4. Fonts and their adaptability;
  5. Expanded optimized interface mode;
  6. Location of alerts;
  7. Display firmware version Location (Bottom right);
  
  Bugs fixed:
  1. Fixed an issue that could occur while changing operation of pools by API;
  2. Operation of Reset/IP Report Buttons for AML Control Boards;
  3. Incorrect baud rate setting for 136x chips;
  4. Inability to generate a diagnostic report;
  5. Operating mode of the device without hashboards connected to it;
  6. Firmware error on some BB models;
  7. Issues with graph ranges not always returning to true value fixed;
  
  Currently supported:
  Antminer S19
  Antminer S19+
  Antminer S19A
  Antminer S19A Pro
  Antminer S19I
  Antminer S19J
  Antminer S19J BB
  Antminer S19J Pro
  Antminer S19 Pro A
  Antminer S19J Pro A BB
  Antminer S19J Pro BB
  Antminer S19 Pro
  Antminer S19(88)
  Antminer T19
  
  Pre-order v1.1.12
  Antminer S19j Pro aml
  Antminer S19 Pro aml
  Antminer S19j Pro BB aml
  Antminer S19 XP aml
  
  Telegram Pre-order
  

  ---

• Release: 1.1.11

  Downloaded: 296

  Date: 18.08.2022

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.11     Install SD download 1.1.11  

  What's new:

  1) Ability to disable interface animation (This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
  2) Panel "quick" settings have been added;
  3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
  4) Fixed interface operation when accessed via https://;
  5) Improved support for mobile devices (Scaling issues resolved as well);
  6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
  7) Antminer S19+ support;
  8) Antminer S19i support;
  9) Support for Antminer S19 (with 88 chips);
  10) Antminer S19 Pro A support;
  11) Antminer S19j Pro A support;
  12) Support for new models of power supplies;
  13) Support for various hash board modifications Bitmain made;
  14) Fixed bugs leading to a restart of the miner;
  15) Improved polling of temperature sensors and chips;
  16) Support for the pause / resume function has been extended to the entire series of firmware;
  17) Currently supported: S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro, S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A

  ---

• Release: 1.1.9

  Downloaded: 310

  Date: 24.05.2022

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.9     Install SD download 1.1.9  

  What's new:

  1) modiffied our API a bit.
  2) fixed chip layout in s19pro and some small UI fixes.
  3) moved “modded psu” switch to “overclocking” page.
  4) restrict profile selection if your’re using stock PSU.
  5) fixed an issue when mining doesn’t return to user pools and hangs.
  6) added support of aftermarket PSU from HMTech.
  7) made “pause” and “resume” cgminer API commands available from local network.

  ---

• Release: 1.1.7

  Downloaded: 266

  Date: 18.02.2022

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.7     Install SD download 1.1.7  

  What's new:

  1) modiffied our API a bit.
  2) fixed chip layout in s19pro and some small UI fixes.
  3) moved “modded psu” switch to “overclocking” page.
  4) restrict profile selection if your’re using stock PSU.
  5) fixed an issue when mining doesn’t return to user pools and hangs.
  6) added support of aftermarket PSU from HMTech.
  7) made “pause” and “resume” cgminer API commands available from local network.

  ---

• Release: 1.1.3

  Downloaded: 228

  Date: 16.02.2022

  Size of the firmware: 0.0 Mb

  Size of SD image: 0.0 Mb

  
  

  Hash Sum of the firmware:

  Hash Sum of SD image:

  
    Update download 1.1.3     Install SD download 1.1.3  

  What's new:

  1) General stability, optimization and revision of the main drivers.

  ---

Chronology of changes by release.