IMPORTANT: This firmware is compatible only with the Antminer S19 (88 chips per chain).
Before installation, make sure you have the correct firmware version for your device.
Check the date of the stock firmware. If the stock BITMAIN firmware is from March 2024 or later, you need to downgrade the firmware version using the image from Series 21 (2024 Unlock) or Series 19 (Stock Firmware) for your model and control board type.
Firmware for all models can be found here: Firmware for All Models
To install the firmware, use an SD card (maximum 16GB, FAT32 format).
IMPORTANT: If you want to flash the Antminer S19 (88 chips per chain) with a Zylinx (xilinx) control board directly to NAND memory without using an SD card, use the TOOLKIT PACK for automatic firmware installation on your devices.
NAND INSTALL: To install the firmware, you must use TOOLKIT. If you are unsure about the model and type of your control board, download the guide for models and board types here.
To get started, download the TOOLKIT PACK (includes firmware for all models). TOOLKIT PACK will automatically select the necessary firmware during installation.
You can also download the TOOLKIT installation file and select the firmware for your control board model and type. Firmware files are available here.
Presets for Series 21, 19, and L7 can be found here.
Example: asicdip-s19-88-xil-sd-v1.2.0-rc4-update
For general understanding of which files to use:
There are several types of firmware files available for this miner model:
Additional Information on Decoding the Firmware File Name:
Other available models and firmware:
For bulk installation of firmware directly to the NAND memory for the Antminer S19 (88 chips per chain) without using SD cards, use the instructions in the Toolkit archive.
WARNING: If the stock BITMAIN firmware is from March 2024 or later, you need to downgrade the firmware date using the image from the Series 21 or Series 19 for your model and control board type.
Firmware for all models is available at this link.
To install the firmware: Download and use the TOOLKIT PACK, which will automatically select the necessary firmware for your model and control board type. If you don't know your model and type, check here.
You can also download the installation file TOOLKIT 1.2.0 and the firmware file for NAND installation from this link, by selecting the latest release.
Presets for Series 21, 19, and L7 can be found in this PDF file.
Mass Firmware Installation Utility
Bitmain APW-12 Modifications
Update Antminer S19 (88) Release 1.2.0 rc4
Install SD Antminer S19 (88) Release 1.2.0 rc4
POPULAR MODES:
S19(88) 115 TH/s - 3850 watt (33 watt - TH/s)
S19(88) 125 TH/s - 4600 watt (37 watt - TH/s)
S19(88) 140 TH/s - 6100 watt (43 watt - TH/s)
STOCK BITMAIN FIRMWARE:
S19(88) 90 TH/s - 3100 watt (34 watt - TH/s)
Release: 1.2.0 rc4
Downloaded: 393
Date: 08.08.2023
Size of the firmware: 0.0 Mb
Size of SD image: 0.0 Mb
Hash Sum of the firmware:
Hash Sum of SD image:
Update download 1.2.0 rc4
Install SD download 1.2.0 rc4
What's new:
Added:
1. NEW AUTOTUNING - automatic tuning of all chips!
2. Remote firmware installation on A113D (amlogic) control boards from micro USB;
3. Remote installation of firmware on xilinx (Zylinx) and BB (BeagleBon) control boards without using SD cards directly to NAND;
4. Support for miners Antminer S19J+;
5. Support for miners Antminer S19L;
6. Limit on the number of miner reboots in case of problems;
7. Presets (set of automatic settings) for S19a Pro;
Changed:
1. Updated presets (set of automatic settings) for S19Pro Hydro, S19Pro+ Hydro;
2. API speed optimization;
Fixed:
1. Working with Nicehash;
2. Errors that led to the fall of the miner (error code: 11);
3. An error that caused the miner to freeze;
4. Improvements in the interface;
Currently supported
Antminers with control boards:
A113D (amlogic) with micro USB;
xilinx (Zylinx);
BB (BeagleBon);
Write directly to NAND memory without SD;
Models:
Antminer S19
Antminer S19+
Antminer S19 (88) xil-sd
Antminer S19 (88) aml-nand
Antminer S19 (126)
Antminer S19 Pro
Antminer S19 Pro A
Antminer S19 Pro Hydro
Antminer S19 Pro+ Hydro
Antminer S19 Hydro
Antminer S19A
Antminer S19i
Antminer S19L
Antminer S19 XP xil-sd
Antminer S19 XP aml-nand
Antminer S19J
Antminer S19J+
Antminer S19J BB
Antminer S19J Pro (xil-sd)
Antminer S19J Pro (aml-nand)
Antminer S19J Pro+
Antminer S19J Pro+ BB
Antminer S19J Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer T19
Mass installation of firmware without SD cards, order via Telegram
Release: 1.1.12
Downloaded: 217
Date: 07.02.2023
Size of the firmware: 0.0 Mb
Size of SD image: 0.0 Mb
Hash Sum of the firmware:
Hash Sum of SD image:
Update download 1.1.12
Install SD download 1.1.12
What's new:
New:
1. Support for miners S19 (88), S19j Pro A, S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
6. Widgets are responsive now! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);
Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;
Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19
Pre-order v1.1.12
Antminer S19j Pro aml
Antminer S19 Pro aml
Antminer S19j Pro BB aml
Antminer S19 XP aml
Telegram Pre-order
Release: 1.1.11
Downloaded: 189
Date: 19.08.2022
Size of the firmware: 0.0 Mb
Size of SD image: 0.0 Mb
Hash Sum of the firmware:
Hash Sum of SD image:
Update download 1.1.11
Install SD download 1.1.11
What's new:
1) Ability to disable interface animation
(This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel "quick" settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported:
S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro,
S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A
Release: 1.1.9
Downloaded: 180
Date: 31.05.2022
Size of the firmware: 0.0 Mb
Size of SD image: 0.0 Mb
Hash Sum of the firmware:
Hash Sum of SD image:
Update download 1.1.9
Install SD download 1.1.9
What's new:
1) modiffied our API a bit.
2) fixed chip layout in s19 (88) and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer API commands available from local network.
Chronology of changes by release.
Gallery
Installation and configuration in pictures.
Video
You can get acquainted with the advantages of the firmware and the main functions by watching the video:
Do you want to cooperate with us?
We offer our partners beneficial cooperation
Asicdip offers special partnership terms for owners and administrators of large mining farms. For wholesalers, mining equipment and major repair services!
As a partner you will receive: