-
Release: 1.2.6 rc5
Downloaded: 1
Date: 06.05.2025
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.2.6 rc5
Install SD download 1.2.6 rc5
What's new:
Firmware for all models is available at this link.
To install the firmware: Download and use the TOOLKIT PACK 1.4.0, which will automatically select the required firmware for your model and control board type. If you do not know your model and type, check here.
New Features
- Support for new models
- Added support for Antminer L9, Antminer S21+, Antminer S21+ Hydro, and Antminer S19 Pro Hydro (120 chips).
- Advanced options
- New options added:
- Ignore chip temperature sensors for Antminer L9, Antminer S21, Antminer T21, Antminer S21 Imm, and Antminer S21 Hydro.
- Set maximum startup delay time (delayed mining start) to reduce load on the power grid/infrastructure — available for all models.
- Specify the minimum number of working boards required to start mining — applicable to all models.
- Power consumption display
- Miner and hashboard power consumption is now displayed from preset values when the power supply unit does not provide consumption data.
- Warning
- If chip temperature sensors are ignored and faulty temperature sensors are skipped, temperature-based protection will be disabled. We are not responsible for any resulting damage.
Improvements
- Fan control
- Optimized behavior based on temperature for more stable and efficient cooling performance.
- Protection against faulty chains
- Mining will automatically stop if a hashboard reports zero chips — the miner will enter error state.
- Log output
- The chip ID is now shown in logs when overheating is detected due to high chip temperature.
- Model name display
- Fixed model name display for Antminer S19 (126) and Antminer S19 (88).
- Operational stability
- Improved overall miner stability during extended operation and under heavy load.
- Pool stability
- Improved connection stability and handling with mining pools.
- User interface
- Various UI improvements implemented to enhance usability.
Bug Fixes
- Balance recovery issue
- Fixed an issue where domains attempted to recover balance during pause.
- Pool loss after reboot
- Resolved an issue causing pools to be lost after a power cycle or miner restart.
- Issue on settings reset
- Fixed a bug where the miner would pause during settings reset or mining process restart if auto-resume after reboot was disabled.
API Changes
- Board display in API
- Programmatically disabled boards are now included in the API response to the summary/chains request.
-
Release: 1.2.6 rc4
Downloaded: 20
Date: 24.01.2025
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.2.6 rc4
Install SD download 1.2.6 rc4
What's new:
Main Improvement
The biggest improvement in this release is the auto-tuning fix to provide better tuning and performance for the following models: Antminer S21, Antminer T21, Antminer S21 Pro, Antminer S21 XP Imm, Antminer S21 Imm, Antminer S21 XP, Antminer S21 Hydro, Antminer S21 XP Hydro, Antminer S19k Pro, Antminer S19 XP, Antminer S19j XP, Antminer S19 XP Hydro, Antminer S19e XP Hydro, and Antminer T19 Pro Hydro.
Our Main Update
Our biggest improvement in this release is the fix for autotune across multiple Antminer models, ensuring better tuning and performance.
New Features
- Support for Submodel HHB68601
- We’ve added support for submodel HHB68601 of the Antminer S21 Hydro, giving even more users access to optimized performance with this device.
Improvements
- Overall Stability
- Enhanced overall miner stability to ensure smoother operations.
- UI/UX Updates
- Introduced various UI/UX enhancements to make your experience more intuitive.
Bug Fixes
- Fan Issues
- Fixed an issue where fans would show as lost during initialization when the minimum fan speed was set to 0%.
- Sensor Operations
- Fixed sensor operations during resume on Antminer L7.
- Preset Disabling
- Corrected disabling issues when switching from Preset to Disabled.
- Top Preset Display Bug
- Addressed a bug where the top preset could appear lower than the current preset.
Summary
This update is designed to deliver improved performance, reliability, and support for a wider range of miners.
-
Release: 1.2.6 rc3
Downloaded: 9
Date: 12.01.2025
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.2.6 rc3
Install SD download 1.2.6 rc3
What's new:
Firmware for all models is available at this link.
To install the firmware: Download and use the TOOLKIT PACK, which will automatically select the required firmware for your model and control board type. If you do not know your model and type, check here.
New Features
- Chip Power Regulation
- Now available for the x21 series (except S21 Pro).
- Expanded Miner Support
- Antminer T19 Pro Hydro
Antminer S21 XP
Antminer S19j XP
Antminer S19e XP Hydro
Antminer S21 XP Hydro
Antminer S21 XP Immersion
Antminer T21 with Xilinx controller
- Preset Switcher
- Added options to ignore fan speed and automatically lower the top preset.
- Power Supply Update
- Added power supply model name for 0x64.
- Pool Updates
- Default pools updated for Antminer L7.
- Patented Chip Throttling Technology
- Now includes hashrate compensation using cooler chips to maintain high performance.
- Chinese Language Support
- Added the ability to work with the interface in Chinese.
- Power Consumption Graphs
- Added power consumption graphs for the device.
- Chip Marking
- x21 series chips now have markings for frequency adjustment due to overheating.
- Maximum Fan Speed
- Added the ability to configure maximum fan speed in auto mode.
- Automatic Interface Language Selection
- The interface automatically selects the language based on system settings.
- Minimum Preset for Autoswitcher
- Added a minimum profile option for automatic switching.
Improvements
- Autotune Algorithm
- Now more efficient.
- Default Voltage
- Reduced for Antminer S19 XP.
- Preset Updates
- New presets added for Antminer S19j Pro+ and S21.
Presets fixed for Antminer L7 and S19i.
Presets fixed for Antminer S19e XP Hydro and S19 (76 chips) with Xilinx controller.
- Accelerated EEPROM Reading
- Faster data reading on all control boards except Xilinx controllers.
- Improved Power Supply Compatibility
- Enhanced compatibility with various power supply models.
- Power Consumption Graph Accuracy
- Significantly improved.
- UI/UX Updates
- Include various user interface enhancements.
- Firmware Security
- Strengthened with additional measures against brute-force attacks.
- Full System Reboot
- The system now requires a full reboot when changing the time zone.
Bug Fixes
- Sensor Readings
- Fixed issues with reading sensor values for S21 Pro.
- Cooling Modes
- Fixed prolonged cooling periods in immersion and Hydro modes.
- Voltage Return
- Fixed an issue with voltage adjustment.
- Pool Configuration Errors
- Fixed issues in User and DevFee pool configurations.
- Network Test Failures
- Fixed network test failures after network settings changes.
- Hashrate Display Issues
- Resolved incorrect hashrate display when reducing chip frequency.
- EEPROM
- Fixed random data corruption and reading errors.
API Changes
- Active Chains Only
- API responses now include only active chains. Disconnected or disabled chains are excluded.
- New Fields Added
- hr_nominal — for theoretical hashrate
build_uuid and build_name — in info requests
power_consumption — in metrics requests
throttled — in chips requests
-
Release: 1.2.0 rc4
Downloaded: 305
Date: 08.08.2023
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.2.0 rc4
Install SD download 1.2.0 rc4
What's new:
New Features
- Added:
- 1. NEW AUTOTUNING - automatic tuning of all chips!
- 2. Remote firmware installation on A113D (amlogic) control boards from micro USB;
- 3. Remote installation of firmware on xilinx (Zylinx) and BB (BeagleBon) control boards without using SD cards directly to NAND;
- 4. Support for miners Antminer S19J+;
- 5. Support for miners Antminer S19L;
- 6. Limit on the number of miner reboots in case of problems;
- 7. Presets (set of automatic settings) for S19a Pro;
Changes
- Changed:
- 1. Updated presets (set of automatic settings) for S19Pro Hydro, S19Pro+ Hydro;
- 2. API speed optimization;
Fixes
- Fixed:
- 1. Working with Nicehash;
- 2. Errors that led to the fall of the miner (error code: 11);
- 3. An error that caused the miner to freeze;
- 4. Improvements in the interface;
Supported Devices
- Currently supported Antminers with control boards:
- A113D (amlogic) with micro USB;
- xilinx (Zylinx);
- BB (BeagleBon);
- Write directly to NAND memory without SD;
To get started, download the TOOLKIT PACK (includes firmware for all models). TOOLKIT PACK will automatically select the necessary firmware during installation.
-
Release: 1.1.12
Downloaded: 103
Date: 07.02.2023
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.1.12
Install SD download 1.1.12
What's new:
New:
1. Support for miners S19 (88), S19j Pro A, S19 XP;
2. Network failsafe. If the settings are changed and are incorrect, the device will roll back the previous network settings;
3. MAC addresses viewable from the dashboard;
4. The ability to return to stock firmware for miners running on our firmware installed on NAND AML and BB control boards;
5. Ability to set the the startup voltage. (Useful for those running close to max of breakers or Power Distribution Unit);
6. Widgets are responsive now! 4k? 1080p? 480p? It all looks BEAUTIFUL;
7. Voltage compensation based on the temperature and performance of the miner;
8. Voltage checking happens before detecting the chips on the boards (Important for diagnostics if PSU issue or chip issue);
9. EEPROM support for new miner models (Yes even those weird ones);
10. Ability to remotely install firmware on AML and BB control boards for large customers. Xilinx - SOON;
11. General firmware optimization and stability changes added prior to auto-tune release (That’s next);
Changed:
1. Work with network settings (DHCP → Static);
2. Pool Widget;
3. Board Widget;
4. Fonts and their adaptability;
5. Expanded optimized interface mode;
6. Location of alerts;
7. Display firmware version Location (Bottom right);
Bugs fixed:
1. Fixed an issue that could occur while changing operation of pools by API;
2. Operation of Reset/IP Report Buttons for AML Control Boards;
3. Incorrect baud rate setting for 136x chips;
4. Inability to generate a diagnostic report;
5. Operating mode of the device without hashboards connected to it;
6. Firmware error on some BB models;
7. Issues with graph ranges not always returning to true value fixed;
Currently supported:
Antminer S19
Antminer S19+
Antminer S19A
Antminer S19A Pro
Antminer S19I
Antminer S19J
Antminer S19J BB
Antminer S19J Pro
Antminer S19 Pro A
Antminer S19J Pro A BB
Antminer S19J Pro BB
Antminer S19 Pro
Antminer S19(88)
Antminer T19
Pre-order v1.1.12
Antminer S19j Pro aml
Antminer S19 Pro aml
Antminer S19j Pro BB aml
Antminer S19 XP aml
Telegram Pre-order
-
Release: 1.1.11
Downloaded: 163
Date: 18.08.2022
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.1.11
Install SD download 1.1.11
What's new:
1) Ability to disable interface animation
(This will be useful if you use remote desktop applications such as AnyDesk or Teamviewer);
2) Panel "quick" settings have been added;
3) More convenient tuning of frequencies for chips and domains (Auto-Tune is being worked on right now);
4) Fixed interface operation when accessed via https://;
5) Improved support for mobile devices (Scaling issues resolved as well);
6) Fixed bugs leading to share rejection and reduced hashrate on the pool;
7) Antminer S19+ support;
8) Antminer S19i support;
9) Support for Antminer S19 (with 88 chips);
10) Antminer S19 Pro A support;
11) Antminer S19j Pro A support;
12) Support for new models of power supplies;
13) Support for various hash board modifications Bitmain made;
14) Fixed bugs leading to a restart of the miner;
15) Improved polling of temperature sensors and chips;
16) Support for the pause / resume function has been extended to the entire series of firmware;
17) Currently supported:
S19, T19, S19 (88), S19 A, S19i, S19j, S19j BB, S19 Pro,
S19a Pro, S19j Pro, S19j Pro BB, S19j Pro A BB, S19+, S19 Pro A
-
Release: 1.1.9
Downloaded: 214
Date: 01.06.2022
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.1.9
Install SD download 1.1.9
What's new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer API commands available from local network.
-
Release: 1.1.7
Downloaded: 208
Date: 18.02.2022
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.1.7
Install SD download 1.1.7
What's new:
1) modiffied our API a bit.
2) fixed chip layout in s19pro and some small UI fixes.
3) moved “modded psu” switch to “overclocking” page.
4) restrict profile selection if your’re using stock PSU.
5) fixed an issue when mining doesn’t return to user pools and hangs.
6) added support of aftermarket PSU from HMTech.
7) made “pause” and “resume” cgminer API commands available from local network.
-
Release: 1.1.3 update-2
Downloaded: 147
Date: 17.02.2022
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.1.3 update-2
Install SD download 1.1.3 update-2
What's new:
1) General stability, optimization and revision of the main drivers.
-
Release: 1.1.3
Downloaded: 199
Date: 16.02.2022
Size of the firmware Update: 0.0 Mb
Size of SD image Install: 0.0 Mb
Hash Sum of the firmware: d41d8cd98f00b204e9800998ecf8427e
Hash Sum of SD image: d41d8cd98f00b204e9800998ecf8427e
Update download 1.1.3
Install SD download 1.1.3
What's new:
1) General stability, optimization and revision of the main drivers.