Firmware

ASICDIP Firmware for Antminer S19j Pro-A

IMPORTANT: This firmware is compatible only with the Antminer S19j Pro-A.

Before installation, make sure you have the correct firmware version for your device.

Important Note:

Check the date of the stock firmware. If the stock BITMAIN firmware is from March 2024 or later, you need to downgrade the firmware version using the image from Series 21 (2024 Unlock) or Series 19 (Stock Firmware) for your model and control board type.

Available Firmware Versions:

Firmware for all models can be found here: Firmware for All Models

Firmware Installation Guide

To install the firmware, use an SD card (maximum 16GB, FAT32 format).

1. Download the Firmware

Download the firmware file for your Antminer S19j Pro-A control board version (the board version is indicated on the white label on the board cover). Unzip the archive and transfer the files to the SD card.

2. Insert the SD Card

Insert the SD card with the ASICDIP firmware into the device and turn on the miner.

3. Return to Stock Firmware

If you remove the SD card, the device will return to the stock BITMAIN firmware.

4. Firmware Update

For firmware update, download the web version of the firmware and upload it via the UPGRАDE function.

5. Power Supply Update

If the miner's power consumption exceeds 4600 watts, update the power supply according to the modification instructions.

How to Flash Directly to NAND Without an SD Card

IMPORTANT: If you want to flash the Antminer S19j Pro-A with a Zylinx (xilinx) control board directly to NAND memory without using an SD card, use the TOOLKIT PACK for automatic firmware installation on your devices.

NAND INSTALL: To install the firmware, you must use TOOLKIT. If you are unsure about the model and type of your control board, download the guide for models and board types here.

To get started, download the TOOLKIT PACK (includes firmware for all models). TOOLKIT PACK will automatically select the necessary firmware during installation.

You can also download the TOOLKIT installation file and select the firmware for your control board model and type. Firmware files are available here.

Presets for Series 21, 19, and L7 can be found here.

How Firmware File Names are Decoded

Example: asicdip-s19-88-xil-sd-v1.2.0-rc4-update

For general understanding of which files to use:

There are several types of firmware files available for this miner model:

Installation Files (install)

Used to install firmware onto the device. If you are installing firmware over the stock version, use the file labeled install.

Update Files (update)

Used to update previously installed firmware. If you are updating the firmware, use the file labeled update.

Files for NAND Installation

These files are installed directly to the control board's memory. Example of a file: asicdip-l7-xil-nand-v1.2.6-rc2-install.tar.gz.

Files for Installation via SD Card

Used for installing firmware from an SD card, available for certain types of control boards. Example of a file: asicdip-l7-xil-sd-v1.2.6-rc2-install.tar.gz.

Additional Information on Decoding the Firmware File Name:

asicdip

Brand name of the firmware.

l7

Antminer model.

xil

Control board type: based on Zylinx processor.

nand

Firmware installation to the control board's memory without using an SD card.

sd

Installation method via SD card (available for all users).

v1.2.6-rc2

Firmware version (release candidate 2).

install

Firmware file type for installation on the device.

update

Firmware file type for updating the already installed version.

Firmware for Antminer models

Other available models and firmware:

1. Antminer L7

Firmware for the Antminer L7 model to optimize performance and enhance reliability. Installation is possible on control boards: xil.

2. Antminer S19

Firmware for the Antminer S19 to improve performance and stability. Installation is possible on control boards: xil.

3. Antminer S19 (126)

Firmware for the S19 (126 chips) model for control boards: aml, cv, with optimization to increase hash rate. Installation is possible on control boards: aml, cv.

4. Antminer S19 (88)

Firmware for the Antminer S19 (88 chips) with processors: aml, bb, cv, xil (Xilinx) and installation on an SD card for maximum performance. Installation is possible on control boards: aml, bb, cv, xil.

5. Antminer S19 Hydro

Firmware for the Antminer S19 Hydro model with efficient liquid cooling to improve performance. Installation is possible on control boards: xil.

6. Antminer S19A

Firmware for the Antminer S19A model, providing stable operation under heavy loads. Installation is possible on control boards: xil.

7. Antminer S19 A Pro

Firmware for the Antminer S19 Pro A model with additional settings for maximum stability. Installation is possible on control boards: xil.

8. Antminer S19e XP Hydro

Firmware for the S19e XP model with liquid cooling to improve efficiency. Installation is possible on control boards: xil.

9. Antminer S19i

Firmware for the S19i model with enhanced features to optimize mining. Installation is possible on control boards: xil.

10. Antminer S19J

Firmware for the S19J model to increase hash rate and mining efficiency. Installation is possible on control boards: bb, cv, xil.

11. Antminer S19J Plus

Firmware for the S19J Plus model with optimization for high stability. Installation is possible on control boards: aml, bb, cv, xil.

12. Antminer S19J XP

Firmware for the S19J XP model with enhanced settings to increase performance. Installation is possible on control boards: aml, cv, xil.

13. Antminer S19J Pro

Firmware for the S19J Pro model with Xilinx processor for improved performance. Installation is possible on control boards: aml, bb, cv, xil.

14. Antminer S19J Pro A

Firmware for the Antminer S19J Pro A model with additional settings for maximum stability. Installation is possible on control boards: aml, bb, cv.

15. Antminer S19J Pro Plus

Firmware for the S19J Pro Plus model with optimization for high stability. Installation is possible on control boards: aml, bb, cv, xil.

16. Antminer S19K Pro

Firmware for the S19K Pro model with settings for improved stability. Installation is possible on control boards: aml, cv.

17. Antminer S19 Plus

Firmware for the S19 Plus model with settings to increase hash rate. Installation is possible on control boards: xil.

18. Antminer S19 Pro

Firmware for the Pro version of the Antminer S19 to improve performance and reliability. Installation is possible on control boards: xil.

19. Antminer S19 Pro A

Firmware for the Antminer S19 Pro A model with additional settings for maximum stability. Installation is possible on control boards: xil.

20. Antminer S19 Pro Hydro

Firmware for the S19 Pro model with liquid cooling to improve thermodynamic efficiency. Installation is possible on control boards: xil.

21. Antminer S19 Pro+ Hydro

Firmware for the S19 Pro+ with liquid cooling to stabilize operation under high load conditions. Installation is possible on control boards: xil.

22. Antminer S19 XP

Firmware for the S19 XP model with Xilinx processor and SD card installation for reliable operation. Installation is possible on control boards: aml, cv, xil.

23. Antminer S19 XP Hydro

Firmware for the S19 XP model with liquid cooling to increase performance. Installation is possible on control boards: xil.

24. Antminer S21

Firmware for the S21 model with improved energy efficiency. Installation is possible on control boards: aml.

25. Antminer S21 Hydro

Firmware for the S21 Hydro model with improved cooling features. Installation is possible on control boards: xil.

26. Antminer S21 IMM

Firmware for the S21 IMM model with installation for immersion cooling. Installation is possible on control boards: aml.

27. Antminer S21 Pro

Firmware for the S21 Pro model to increase performance and stability. Installation is possible on control boards: aml.

28. Antminer S21 XP

Firmware for the S21 XP model with enhanced settings to improve performance. Installation is possible on control boards: aml.

29. Antminer S21 XP Hydro

Firmware for the S21 XP model with liquid cooling to improve thermodynamic efficiency. Installation is possible on control boards: xil.

30. Antminer S21 XP IMM

Firmware for the S21 XP IMM model with installation for immersion cooling. Installation is possible on control boards: aml.

31. Antminer T19

Firmware for the Antminer T19 model, optimized for high performance. Installation is possible on control boards: xil.

32. Antminer T19 Hydro

Firmware for the Antminer T19 Hydro model with improved liquid cooling features. Installation is possible on control boards: xil.

33. Antminer T19 Pro Hydro

Firmware for the T19 Pro Hydro model with enhanced performance and cooling. Installation is possible on control boards: xil.

34. Antminer T21

Firmware for the T21 model to increase performance and stability. Installation is possible on control boards: aml, cv, xil.

How to Update Firmware on Multiple Devices

For bulk installation of firmware directly to the NAND memory for the Antminer S19j Pro-A without using SD cards, use the instructions in the Toolkit archive.

WARNING: If the stock BITMAIN firmware is from March 2024 or later, you need to downgrade the firmware date using the image from the Series 21 or Series 19 for your model and control board type.

Firmware for all models is available at this link.

To install the firmware: Download and use the TOOLKIT PACK, which will automatically select the necessary firmware for your model and control board type. If you don't know your model and type, check here.

You can also download the installation file TOOLKIT 1.2.0 and the firmware file for NAND installation from this link, by selecting the latest release.

Presets for Series 21, 19, and L7 can be found in this PDF file.